Toque setting ABY sump bolts

**Error404** · 19 July 2018, 18:15

10nm on the M6, 20nm on the M8

**MARKMIDGE** · 20 July 2018, 04:37

Thanks man, will have to get myself a workshop manual soon!

**DEREKCO** · 20 July 2018, 12:30

Tight

**Rikki Kitto** · 20 July 2018, 15:56

Defo check em after 50 miles too as 3 of mine ended up in my tyres

**Thuppu** · 20 July 2018, 17:13

Yes, with 10Nm they need to be re-tighten after a while, other wise they will disappear.

Or just tighten them harder in the first place

**_ShurikeN** · 20 July 2018, 17:31

I feel some hope to keep my bolts with these:

DIN 137B spring washers. Similar to what factory fasteners on these motors had.

**Error404** · 20 July 2018, 18:30

I use DIN7980 spring washers on all the M6 fasteners, on the sump, oil pump and rear main seal - never lost one yet

**MARKMIDGE** · 21 July 2018, 06:07

Top tips people! Thanks for responses.

**SteveH** · 21 July 2018, 07:52

Blue thread lock works too

Comment