boost pressure test kit

[topsparky]

this is my boost test kit the one i used to test my system yesterday (see other thread in wanted forum)i reckon it'll hold pressure upto about 200 bar
what do you reckon guys

i've posted a picture to give you all a laugh,but it does the job it found a leak in my maf hose.sorry caused a leak in my maf hoses

[AndyP]

Isambard Kingdom Brunel would have been proud

[terrybullwon]

Isambard Kingdom Brunel would have been proud

that explains the split hose

Andy, do you have any kits yet?

Mr Newsh has been very kind in lending his but i really should return it

[topsparky]

that explains the split hose

Andy, do you have any kits yet?

Mr Newsh has been very kind in lending his but i really should return it

what's wrong with mine you just need a hiab to fit it

[LHD_Kid]

Looks like a cracking kit....!!


BTW, which pipes do the smaller 2 go in?
Presumably the pipe which connects intercoooler to the tube across the side of the engine, and the smaller one?
Clearly the big one is the MAF one...
Cheers
Chris

[AndyP]

that explains the split hose

Andy, do you have any kits yet?

Mr Newsh has been very kind in lending his but i really should return it

I should have them finished by the end of the week. I'll put a post up when they are done.

[topsparky]

Looks like a cracking kit....!!


BTW, which pipes do the smaller 2 go in?
Presumably the pipe which connects intercoooler to the tube across the side of the engine, and the smaller one?
Clearly the big one is the MAF one...
Cheers
Chris

the small steel one is a bung for the crank case breather
i'm going to make some more @ work tomorrow cause there's a lathe
and i'm on maintainance (not much to do)
the other one goes into the inlet pipe

[terrybullwon]

Put me down for one please andy

[newsh]

Put me down for one please andy

Can I ave mine back please James? While we're young, like

[topsparky]

[terrybullwon]

pm sent