I have a couple of K24 7400 hybrids I've put together and a chap in the states is very interested in one, however he like me needs advice on software and who to get it from, I was kinda planning on keeping one unit for myself just to try it out before going MUCH bigger but it may also be for sale soon.
i'm going to tune my B3 conversion in stages starting off with a stock K24 and software to iron out any bugs, the next stage will be an RS2 hybrid with 56mm #6 hot-side and a billet comp wheel so I may as well jump straight to using that unit as I have software for it. The final stage will be some sort of K27/8/9 hybrid but that's a little way down the line and I'm yet to finalise the spec for this old school monster.
Anyway....He's running a 3B in a 1991 200 20VT and wants to stick with the stock ECU for the time being, not sure if it's an Auto or not but I'll find out. I don't know what injectors he has or is planning on using but i'd imagine RS2 items or Green Giants would both work well with the right mapping for a 7400 along with a four bar FPR. I know he's going to have to upgrade to at least a 2.5K MAP sensor but that's straight forward enough.
I know a couple of members are running these turbos on 3B's as well as ABY's with good results. Please could someone point me in right direction for a good safe chip set, his target power is 330/340 which I think can be realistically achieved with the Volvo hybrid.
i'm going to tune my B3 conversion in stages starting off with a stock K24 and software to iron out any bugs, the next stage will be an RS2 hybrid with 56mm #6 hot-side and a billet comp wheel so I may as well jump straight to using that unit as I have software for it. The final stage will be some sort of K27/8/9 hybrid but that's a little way down the line and I'm yet to finalise the spec for this old school monster.
Anyway....He's running a 3B in a 1991 200 20VT and wants to stick with the stock ECU for the time being, not sure if it's an Auto or not but I'll find out. I don't know what injectors he has or is planning on using but i'd imagine RS2 items or Green Giants would both work well with the right mapping for a 7400 along with a four bar FPR. I know he's going to have to upgrade to at least a 2.5K MAP sensor but that's straight forward enough.
I know a couple of members are running these turbos on 3B's as well as ABY's with good results. Please could someone point me in right direction for a good safe chip set, his target power is 330/340 which I think can be realistically achieved with the Volvo hybrid.
Comment