Possible oil starvation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Thuppu
    S2Forum Freak
    • Sep 2010
    • 4115
    • Country: Finland

    #16
    Josh, what grade oil do you use?

    Audi UrS4 Avant 2.5 20vt - twincharged - Project
    Audi 80q B4 Sedan 2.2 20vt - Daily user
    BMW 320d Touring e91 M-Sport - Daily user
    BMW 740iA e38 - Project

    Comment

    • S2_avant 19930325
      S2Forum Maniac
      • Mar 2019
      • 648
      • Country: Sweden

      #17
      Originally posted by Error404
      Josh, I can supply a baffle set with Viton check flaps - it requires some cutting out of the original baffles and welding into the sump. Designed to work with the PKKM horizontal baffle.

      image_67299.jpg

      Can you PM me price.
      Best regards

      Comment

      • Error404
        Super Moderator
        • Mar 2007
        • 19789
        • Country: United Kingdom

        #18
        Just waiting on a price back from my laser guy, I’ve lost the details on how much I paid last time
        Panthero Coupé quattro 20vt
        Indigo ABY coupé
        Imola B6 S4 Avant

        Comment

        • JOSH,S ABY S2
          S2Forum Enthusiast
          • Jun 2010
          • 109
          • Country: England

          #19
          I’m using Fuchs Titan race pro s 5w40.

          Comment

          • SteveH
            Super Moderator
            • Jul 2003
            • 4460
            • Country: United Kingdom

            #20
            I run Titan 10w50. Car's been tracked plenty of times and having just stripped it down, the bearing wear is minimal, for a 400+ motor.
            91 Modded 3B
            14 A6 Avant Black Edition

            Comment

            • Bowie69
              S2Forum Fiend
              • Nov 2013
              • 2675
              • Country: England

              #21
              You can change the sump without removing the subframe, just not if you have poly/solid bushes in it, just remove rear bolts and loosen fron, then pull down on rear of subframe and it will slip out.

              If you have solid/poly, there's not enough flex to do this.

              Comment

              Working...