ok this is a strange one I had the car running i then removed the battrey to feed a vaccum pipe for my map sensor i put the battrey back and now it wont fire i have fuel and i have taken a spark plug out and checked spark it is sparking but it may be a little weak but not sure ever way when it is all in it dose not fire at all if you wnat to know i do have it an a aftermarket ecu but i reflased the map back on to it as well as ajusting timming in the map to see if that made a diffrence it didn't i also put the old ecu back in and nothing is any different on the new ecu i have signal from the crank, the refrance and the hall sensor i have replaced the rotor arm in the dizzy and checked the dizzy it looks fine i tested the coil that seams fine i did stuppidly forget to check the fuse but i dont know what els to do?
when i say it dosent fire i mean it realy dosent fire not tring no combustion on any cylider what so ever
when i say it dosent fire i mean it realy dosent fire not tring no combustion on any cylider what so ever
Comment