What is it for ? the white one ? The other 2 are gor the bulky sensor ? correct ?
-
You do not have permission to view this gallery.
This gallery has 1 photos. -
-
The white single wire goes to the single oil pressure switch under the cotton reel one. The other two to the cotton reel (dual switch).Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Hmm ,, on my car it was mounted in the lower ,, shifted if i compare to the picture you sent .. but the should not matter i suppose ,, the white one ,, is to for the car to warn if the oilpressure is to low on the speedometer ?Comment
-
On my picture i have my own sensor ,,Comment
-
Yes, I does matter.
white one is for start up oil pressure I believe. Cotton reel is four auxiliary gauge and above certain revs. Might be the other way around but cotton reel defo feeds aux gauges.
Fitted incorrectly it won't work properly.Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
So i have to switch the senders ,, placement ,, and remove the sender i added to my stand alone ecu ,, and put the original sender there ? Correct ,, ? and all three original wires connecte ,, correct ? I have oil temp addede on the oil draining plug ,, any tips were i relocate my oil pressure sender ?Comment
-
Hmm is there a special trick to remove the big sender ?Comment
-
Removed it ,, pretty smooth with right tool
Comment
Comment