Announcement

Collapse
No announcement yet.

DO88 hoses compared to other brands.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Vauhtiveikko View Post
    ...Hose clamps and how you tighten them makes big difference also...
    Yes...
    I'm basque (brave) and cut some hoses why that (facepalm).

    photobucket SUCKS
    sigpic

    Comment


    • #17
      Fitted the intercooler set today and they went on very well. I'm very pleased with them.

      Comment


      • #18
        image_79892.jpg image_79893.png

        Yeah have to say Im pleased as well.
        I bought the Ur-Quattro set from DO88 ( do88-kit68S ) as well for my Audi S2

        This should be in the S2 kit in my opinion.

        Wastegate vacuum
        Ref: 034145742B

        Vacuum
        Ref: 034145745A
        https://www.s2forum.com/forum/member...-3b-1991-coupe

        Comment


        • #19
          ^Would this kit also be correct for a stock 200 20v?
          Had an overboost code, and found #15 had split and got a link here.
          Going to check the condition of the other two stock hoses as well.

          Comment


          • #20
            Originally posted by k2exoman View Post
            ^Would this kit also be correct for a stock 200 20v?
            Had an overboost code, and found #15 had split and got a link here.
            Going to check the condition of the other two stock hoses as well.
            I would change out everything if you can afford it, those old hoses is usually in bad condition
            https://www.s2forum.com/forum/member...-3b-1991-coupe

            Comment


            • #21
              I have used various hoses and always come back to Roose

              Comment


              • #22
                They are good but the import, shipping fees made it quite expensive to get it to Norway. But I think they are much better than do88. and you can get it in other color, etc
                https://www.s2forum.com/forum/member...-3b-1991-coupe

                Comment


                • #23
                  Originally posted by larsaskogstad View Post

                  I would change out everything if you can afford it, those old hoses is usually in bad condition
                  Looking at doing this, the do88 kit includes the waste gate vacuum and n75 vacuum hoses.

                  Roose doesn't appear to carry these in a pre-molded form the way do88 does.

                  The intake pressure hoses have already been replaced with Samco.

                  Comment


                  • #24
                    Personally I don’t like using aftermarket hoses for either the throttle body and the MAF to turbo hose, both of the factory ones for these locations have internal flanges which help them stay in place. This is of particular importance with the throttle body hose as it sees positive pressure.
                    1989 B3 2.0 3A 80 quattro... Budget 1.8T Project.
                    1992 C4 100 2.8 Avant quattro... Mobile Sitting Room.
                    1995 RS2... MTM K26/7 380 BHP Conversion.
                    1990 Corrado G60... Breaking For Parts.

                    Comment


                    • #25
                      I upgraded my TB to the ANN type and had Roose make me a custom hose for it as the Samco kept blowing off

                      Comment


                      • #26
                        Roose all the way ! I just fitted the hoses on my Avant today and they are very good quality
                        You do not have permission to view this gallery.
                        This gallery has 1 photos.
                        Emerald Green ABY Coupé
                        RS2+ Spec
                        @audis2kid - instagram

                        Comment

                        Working...
                        X