Broken plastic part for cooling hose .. replacement ?

[S2_avant 19930325]

Hi guys

Found a broken plastic part on the backside of the engine.

OEM nr:034121143E is on the part.

The right way to go is a aluminium one like this?

https://www.ebay.com/itm/Wasseransch...4AAOSwiAdgR4kq

Or do you recommend something else ?

Not the cheapest part but saves problems.

Feels like the plastic can break again if i try to buy something original ?

Is it a common problem ?

The correct dimension on the original oring is 21x3 .. correct ?

Best regards

[S2_avant 19930325]

Does somebody have the exact dimension on diameter of the plastic pipe that holds the oring ?

[Tractor Dave]

Alex (error 404) makes a very good replacement.

[Error404]

Thanks Dave

https://www.ultraperformance.co.uk/alloy-rear-coolant-adapter

[S2_avant 19930325]

Perfect placing order tomorrow

[John.]

https://www.ultraperformance.co.uk/a...oolant-adapter

I'm assuming you don't do the 7A type anymore?

[Error404]

I have 7A/3B version also

https://www.ultraperformance.co.uk/alloy-rear-coolant-hose-adapter-3b

[Bowie69]

I have one of those "on the list" for when I rebuild my engine.....

[John.]

I have 7A/3B version also

https://www.ultraperformance.co.uk/alloy-rear-coolant-hose-adapter-3b

That's good to know, I got one from you many years ago but you never know when another 20v might come along.