Announcement

Collapse
No announcement yet.

Crankshaft pulley bolt - p/n 034 105 229a not available

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crankshaft pulley bolt - p/n 034 105 229a not available

    Dear All,

    I have a RS2 ADU Motor and Audi Dealers say it is NLA, anyone know what size bolt and what strength steel it is made of?

    Regards
    George

  • #2
    Still available from Tradition
    https://shops.audi.com/en_GB/web/tra...-034105229a-10
    Nothelle S2 Avant
    Black Ur project
    Ocianic Ur project gone
    S2 Coupe project gone
    Urs6 plus project gone

    Comment


    • #3
      It's M18x1.5, 65mm long but unless it's damaged it can be re-used
      Mike

      http://www.s2-audi.co.uk

      Comment


      • #4
        Hi Mike,

        Is this a stretch bolt?

        Regards

        George

        Comment


        • #5
          If it can be re-used it won't be a stretch bolt.

          Comment


          • #6
            It's a tough one. 12.9 grade. Avoid the febi copy as it has a much thinner collar.
            Nothelle S2 Avant
            Black Ur project
            Ocianic Ur project gone
            S2 Coupe project gone
            Urs6 plus project gone

            Comment


            • #7
              Should the bolt be used with a washer / diamond washer ?

              Comment


              • #8
                Originally posted by macspring View Post
                Should the bolt be used with a washer / diamond washer ?
                Yes. Still available from ebay.​​​​de if your old one is damaged.
                Nothelle S2 Avant
                Black Ur project
                Ocianic Ur project gone
                S2 Coupe project gone
                Urs6 plus project gone

                Comment


                • #9
                  Originally posted by gvr View Post
                  Hi Mike,

                  Is this a stretch bolt?

                  Regards

                  George
                  As John has hinted at, it's not a stretch bolt. Tightened to 450 Nm
                  Mike

                  http://www.s2-audi.co.uk

                  Comment


                  • #10
                    Could be worth getting some custom ones made to the correct dimensions. Any interest?
                    sigpic

                    1992 3b S2 Coupe

                    Comment


                    • #11
                      I agree, I will be interested should their be other members who agree.

                      Comment


                      • #12
                        Originally posted by Tractor Dave View Post
                        It's a tough one. 12.9 grade. Avoid the febi copy as it has a much thinner collar.
                        The same for the SWAG one? I was checking for 3b s2, Febi and Swag both popped up in the webshops.
                        https://www.s2forum.com/forum/member...-3b-1991-coupe

                        Comment


                        • #13
                          Not seen the swag one.
                          Nothelle S2 Avant
                          Black Ur project
                          Ocianic Ur project gone
                          S2 Coupe project gone
                          Urs6 plus project gone

                          Comment

                          Working...
                          X