cam belt position is looking odd

[S2_avant 19930325]

The belt looks/is off on the cam , waterpump.
Its 1-2mm outside the sprocket on the cam and waterpump.

On the tensioner it looks ok.

On the crankshaft it looks very tight to sheet metal.

[Bowie69]

See:

https://www.s2forum.com/forum/member-s-area/member-s-cars/71263-resurrection-of-my-cq20v?p=2116711#post2116711

and....

https://www.s2forum.com/forum/member-s-area/member-s-cars/71263-resurrection-of-my-cq20v?p=2116912#post2116912

When I replaced the pump, everything seemed to be running up fine.

SKF pump replacing a Dolz branded one, that appeared identical.

[S2_avant 19930325]

Did you have issues with alignment of the belt on cam sprocket and waterpump ?

What OEM number was it on skf waterpump ? I cant find oem number on the complete tensioner , only a bearing.

[Bowie69]

Only noted on the pump, but could have been on the cam as well, I took the belt off before looking!

This is the pump, direct from SKF:

https://www.amazon.co.uk/dp/B00AJUPIDA/ref=pe_27063361_487055811_TE_3p_dp_1

VKPC 81606

[Bowie69]

The pump is the tensioner, the idler is :

https://www.ebay.co.uk/itm/Timing-Be...-127635-2958-0

Remove with puller or carefully with two lever bars. Tap new one back home with a little sealant, as otherwise can leak. Do NOT use the bolt to pull it home, it will snap.

[S2_avant 19930325]

The ETKA says 054109479A , found it on autodoc it should fit to. How do you mean the pump is the pump is the tensioner ? Aha ok you mean the tensioner is with the waterpump.

[S2_avant 19930325]

sorry .. 078109244F is correct one i believe.

[Tractor Dave]

Only noted on the pump, but could have been on the cam as well, I took the belt off before looking!

This is the pump, direct from SKF:


https://www.amazon.co.uk/dp/B00AJUPI...811_TE_3p_dp_1

VKPC 81606

Is not the skf S2 pump 81612? And only £30 direct from skf.
https://vehicleaftermarket.skf.com/u...ucts/VKPC81612

And on ABY engine idler is the tensioner. Pump is static.

[S2_avant 19930325]

Hmm . ok .. the engine idler .. do you have a oem number on that Dave ? Tried to find it in the ETKA

[S2_avant 19930325]

By the way , mine has exactly the same sprocket as the link you sent Dave.

[S2_avant 19930325]

078 109 244 F .. thats only the roller ...

[Tractor Dave]

This is the idler according to skf.

https://vehicleaftermarket.skf.com/uk/en/products/VKM21052

Can you order direct from skf where you are? Saves the risk of counterfeit goods and they are well priced.

[S2_avant 19930325]

yes i can ,, skf is swedish. they have retailers.

[Bowie69]

Ah, assumed wasn't ABY, apologies, do check part nos, SKF pump is fine

[S2_avant 19930325]

Is it ok to show the threads a little bit on the of the cam belt. That cant be right