Help wanted please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • VincentRS2
    S2Forum Hobbyist
    • Apr 2021
    • 10
    • Country: Netherlands

    #1

    Help wanted please

    Help Wanted,.

    Hello audi fans!, yesterday i made an pull with the car, in 3th gear, till 7500 aprox.. Afterthat the car runs very strange, i looked at the log file from Vems and noticed that something was maybe broken or else... Before the car runs very fine... starts good, cold and warm, drives very good.. Maybe one of you can see whats wrong or defect.. I saw that the pulse width sometimes is zero.. and lambda is jumping around..



    Regards Vincent

    Setup:
    Audi S2 3b
    TTE380 turbo
    470 cc Bosch
    n75
    coils NGK R06 02 S 003 00 (U5014 395N) red ones
    Attached Files
    Last edited by VincentRS2; 9 June 2022, 09:33.
  • newsh
    S2Forum Obsessed
    • Aug 2003
    • 16226
    • Country: United Kingdom

    #2
    The first thing I would do is a boost leak check.

    S2 Coupe 3B Project


    Ur quattro restoration

    S2 Avant

    Boost is the new rock and roll!
    sigpic

    Comment

    • pfi
      S2Forum Addict
      • Jun 2016
      • 274
      • Country: Norway

      #3
      check the MAF connector, known issue

      Comment

      • VincentRS2
        S2Forum Hobbyist
        • Apr 2021
        • 10
        • Country: Netherlands

        #4
        Originally posted by pfi
        check the MAF connector, known issue
        Thanks! It was the first time in all times that i drive so many rpm's,.... could the MAF connector suddenly be defect...?.

        Comment

        • pfi
          S2Forum Addict
          • Jun 2016
          • 274
          • Country: Norway

          #5
          Kind of, corrotion on the contacts, happened to me, behavior like You described, pulled it off/on a couple of times and all ok for now

          Comment

          • VincentRS2
            S2Forum Hobbyist
            • Apr 2021
            • 10
            • Country: Netherlands

            #6
            Originally posted by pfi
            Kind of, corrotion on the contacts, happened to me, behavior like You described, pulled it off/on a couple of times and all ok for now
            I try that also .. let you guys know about that

            Comment

            • pfi
              S2Forum Addict
              • Jun 2016
              • 274
              • Country: Norway

              #7
              Could of course be a leak somewhere but the MAF is easy to check before doin' a boost leak test ...
              ( My experience is from a std 93' ABY )

              Comment

              • VincentRS2
                S2Forum Hobbyist
                • Apr 2021
                • 10
                • Country: Netherlands

                #8
                Originally posted by VincentRS2

                Thanks! It was the first time in all times that i drive so many rpm's,.... could the MAF connector suddenly be defect...?.
                I saw i have no MAf sensor
                You do not have permission to view this gallery.
                This gallery has 1 photos.

                Comment

                • pfi
                  S2Forum Addict
                  • Jun 2016
                  • 274
                  • Country: Norway

                  #9
                  Originally posted by VincentRS2

                  I saw i have no MAf sensor
                  At least eliminated a possible source of error then ...

                  Comment

                  • VincentRS2
                    S2Forum Hobbyist
                    • Apr 2021
                    • 10
                    • Country: Netherlands

                    #10
                    Originally posted by pfi

                    At least eliminated a possible source of error then ...
                    I looked again at the log file,.. i noticed that the spark angle most at the time at 7 degrees was... but in the settings is that 12 degrees.... , then after 5 minutes its goes up in rpm , and from 15 to 24 degrees... spark... Could it be i blew the coils? after that rough pull in 3th gear?

                    Comment

                    • Rikki Kitto
                      S2Forum Zealot
                      • Feb 2010
                      • 6276
                      • Country: England

                      #11
                      No MAF, what is this Voodoo

                      Comment

                      • pfi
                        S2Forum Addict
                        • Jun 2016
                        • 274
                        • Country: Norway

                        #12
                        Originally posted by Rikki Kitto
                        No MAF, what is this Voodoo
                        nope, several "aftermarket" supports MAF "deletion"

                        Comment

                        • Rikki Kitto
                          S2Forum Zealot
                          • Feb 2010
                          • 6276
                          • Country: England

                          #13
                          Makes sense when new ones are £500 if you can find one

                          Comment

                          • pfi
                            S2Forum Addict
                            • Jun 2016
                            • 274
                            • Country: Norway

                            #14
                            Yup, really expensive as a new one
                            but, You might be lucky to find a used one for a fraction of the cost
                            lucky be me, got two spares

                            Comment

                            • Rikki Kitto
                              S2Forum Zealot
                              • Feb 2010
                              • 6276
                              • Country: England

                              #15
                              Problem is as they age they become less accurate

                              Comment

                              Working...