Help wanted please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pfi
    S2Forum Addict
    • Jun 2016
    • 274
    • Country: Norway

    #16
    Originally posted by Rikki Kitto
    Problem is as they age they become less accurate
    hope it's not only age but milage that counts ?
    my spares has less than 2oo'km ...

    Comment

    • newsh
      S2Forum Obsessed
      • Aug 2003
      • 16226
      • Country: United Kingdom

      #17
      Originally posted by Rikki Kitto
      No MAF, what is this Voodoo
      It’s called “speed density” instead of having a MAF the air mass is calculated from the air temperature and pressure. (MAP and IAT). You can do this with most aftermarket or PRJMod.

      S2 Coupe 3B Project


      Ur quattro restoration

      S2 Avant

      Boost is the new rock and roll!
      sigpic

      Comment

      • Bowie69
        S2Forum Fiend
        • Nov 2013
        • 2675
        • Country: England

        #18
        Yep, simplifies, and perfectly up to the job.

        Comment

        • K Simmonds
          S2Forum Zealot
          • Dec 2007
          • 7627
          • Country: Wales

          #19
          There a lot to be said for going for 'speed density', does a away with a ridiculously expensive component and works very well.

          I picked up a new MAF from AT for around £200 about eight years ago, got the normal S2 version as opposed to the ADU which was nearly twice the price, their the same apart from the screens.
          1990 B3 2.0 80 quattro.
          1992 C4 2.8 Avant quattro
          1994 MTM RS2.
          1998 B5 TDI quattro Sport.
          2000 B5 TQS.

          Comment

          • VincentRS2
            S2Forum Hobbyist
            • Apr 2021
            • 10
            • Country: Netherlands

            #20
            IN this log : its a cold start, spark angle is 7 degree, but value in table is 12.. strange..?! When the coolant gets warmer, things getting worse, I have no idea..
            Attached Files

            Comment

            • VincentRS2
              S2Forum Hobbyist
              • Apr 2021
              • 10
              • Country: Netherlands

              #21
              Hello! Today i measured the values of the TPS ,.. close position

              Pin 4-6 - 0,2 Ohm (must be zero i read)
              Pin 2-3 - 0,945 Ohm ?! (must be 750 - 1300 i read)
              Pin 1-2 - 2089 Ohm (must be 1500-2600 i read)

              Is this broken??

              Comment

              Working...