Newsh Stroker Project

[Acidburn]

He's selling iirc as he commented in a different thread it was for sale.

[repo]

Yes, tall block is the key here. Tall block requires long rod. 144mm is not considered as such.

144mm rod and 95.5 stroke crank are not compatible. Most certainly not for 1000hp, sad but true.

[newsh]

Oh come on Jamo, you know you want to sell it to me

I need to start doing the research but to start with I need to chose between the diesel and crank or the stock block with crank and rebore and what rods/pistons etc..

Iceland man are you selling? Or just bragging??

[magarv]

And no, one 1000hp pull on dyno, before/while explosion is not evidence.

Wrong!!!!! Jonus have done it twice.
Once in 2006 with the old 1065hp, with racefuel/nos with the engine in the old green 90q
Once in 2007 with 1008hp, e85 without nos and 1255hp with nos/racefuel. Actual the highest measured hp was 1285hp, but they had to abandon that pull because it leaned out. They made the 1255hp pull later same day with an extra fuel pump in the system.

I know KRB had a 1033hp pull, e85 without nos, but that ended as you say with explosion and broken crancshaft.

But they are all "tall blocks" (TDI)

Both in VS Motors Dyno.

[Jamo]

So the above engine is a 95.5mm crank in a standard 220mm block?

Different kind of stroker works the same but reduced rpm limit http://www.motorgeek.com/phpBB2/viewtopic.php?t=15035

Depends Newsh, what kind of stroker are you looking for? the 220mm standard or the diesel 236mm tall block?

[repo]

I would love to see bulletproof evidence of 1000hp taken out of stroker with 144mm rods.

Even 500hp sounds too much.

And no, one 1000hp pull on dyno, before/while explosion is not evidence.

[urquattro-island]

2,6ltr

Anyone got a stroker engine they want to sell? Or any parts, unfinished project etc?

here are some figures on my new built engines, the one is 2,5ltr and the other is 2,6ltr
Diesel crank and blueprinted engines with certificate.
144 mm conrods
95.5 stroke
82mm bor 83 mm bor

Je pistons
scat and eagle forged rods
arp bolts
coated bearings
new oil pumps

engines built for 1000hp.

[urquattro-island]

i

have a blueprinted stroker..

[Jamo]

Anyone got a stroker engine they want to sell? Or any parts, unfinished project etc?

Not me

[terrybullwon]

And heres the pills

http://www.motorgeek.com/phpBB2/viewtopic.php?t=18531&sid=3dadf84b3c63403a11fffe621f2b6c1e

[terrybullwon]

Blimey John. you going for massive power now too ??

The virus is spreading

[s2_bo]

Blimey John. you going for massive power now too ??

[newsh]

Anyone got a stroker engine they want to sell? Or any parts, unfinished project etc?