What else can it be?!

[terrybullwon]

I have just realised I havent got any of the connectors needed to create the new loom for the 1.8 coils, so wont be able to fit them tomorrow

Terry, Id like to take up your offer of trying your coils if possible, how can we go about that?

No problem,

Give me a Pm

[dest]

Right, a step forward has been made, I took the plunge and ordered the 034 wiring loom for 1.8 coils

So it can now sit and be miserable on the drive until that comes
Thanks for the offer of trying your coils though James, it was much apprechiated (I can never spell that word lol)

Ive been given 4 1.8 coils, and have only had to buy one more to go with them, so soon as the loom is here, it should be working properly at last!!

[Acidburn]

Then its more power, bigger wheels etc....

[dest]

Too Bloody Right It Is!!!!!!!!

[Acidburn]

Well i'll be bringing that rear panel up shortly so you will have to get that on

[dest]

Yep, ive got some new rings and rear s2 badge to compliment it
See you later mate

[dest]

Well, it turns out that it CAN be something else!
I got the loom from 034, new 1.8T coils, and was just at the last hurdle of fitting them and had to remove the intake pipe that goes to the throttle body to get access to the ground point on the back of the head, upon carefully removing it, the hose between the pipe and TB literally fell in half!

So, new black silicon one ordered from Roose, should be here tomorrow...

[Cullam3n]

Ah I know that pattern all too well

[Acidburn]

Same bit as whats on mine, if you could pm me what urs set you back so I can consider getting a spare.

[dest]

20 quid direct from Roose (same as the Quatronics ones) next day delivery

[Acidburn]

20 quid direct from Roose (same as the Quatronics ones) next day delivery

Lol and there is me thinking that they was exclusive

[dest]

Got the inlet pipe off and cleaned up, thought Id take the time to respray it matt black too while Im waiting!
Got rid of all the scratches

[Acidburn]

Thats looking good, now you will have to do the rest of the engine bay

[dest]

Thats what I was thinking!