HELP! New engine needed...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • spink
    S2Forum Freak
    • Jul 2003
    • 4382
    • Country: England

    #46
    are you sure you dont mean oil cooler?

    think a standard one is close to 200 quid plus lines but a mocal one would probably be cheaper
    Last edited by spink; 18 November 2007, 15:39.

    Comment

    • fidoe
      S2Forum Fanatic
      • Mar 2006
      • 75
      • Country: United Kingdom

      #47
      Originally posted by spink
      are you sure you dont mean oil cooler?

      think a standard one is close to 200 quid plus lines but a mocal one would probably be cheaper
      Sorry, wasn't being clear there. Oil cooler has to be replaced (from Audi just over £200), as it's got a big hole in it from where the AA man wrenched a pipe out. However, it's been suggested it might be a good opportunity to upgrade the intercooler at the same time...
      95 ABY Coupe...back on the road with new engine/oil cooler and bonnet!

      Comment

      • Acidburn
        S2Forum Obsessed
        • Jun 2007
        • 13459
        • Country: United Kingdom

        #48
        Ok surprised you didn't get the intercooler with the engine off sal?

        Have a look for the thread by s2_bo about intercooler plumbing as its got some very good info about how he's done his and how most people are going lately.

        Comment

        • spink
          S2Forum Freak
          • Jul 2003
          • 4382
          • Country: England

          #49
          Originally posted by fidoe
          Sorry, wasn't being clear there. Oil cooler has to be replaced (from Audi just over £200), as it's got a big hole in it from where the AA man wrenched a pipe out. However, it's been suggested it might be a good opportunity to upgrade the intercooler at the same time...


          crikey so did the aa bloke knacker that as well? you should be able to get another aby intercooler for about 40 quid(couple in the for sale section recently)

          Comment

          • fidoe
            S2Forum Fanatic
            • Mar 2006
            • 75
            • Country: United Kingdom

            #50
            question I had was more around is it worth me upgrading to a different intercooler than the standard aby one...?
            95 ABY Coupe...back on the road with new engine/oil cooler and bonnet!

            Comment

            • fidoe
              S2Forum Fanatic
              • Mar 2006
              • 75
              • Country: United Kingdom

              #51
              also, anyone know of the cheapest way to get an engine from Sal (Brum) to TAP (Bucks)? it's been mentioned that TNT overnight service may be cheap, but not looking so good to me at the moment. Anyone know the approximate dimensions and weight of an ABY engine as well? the courier/transport companies seem to want to know weight/height/length...
              95 ABY Coupe...back on the road with new engine/oil cooler and bonnet!

              Comment

              • spink
                S2Forum Freak
                • Jul 2003
                • 4382
                • Country: England

                #52
                You may as well stick on an RS2 crossmember and intercooler while your at it,weight is approx 170kg from memory,that includes manifolds and turbo etc

                Comment

                • s2driveruk
                  Super Moderator
                  • Jul 2003
                  • 12696
                  • Country: England

                  #53
                  i'd look at companies who specialise in palletised transport maybe?
                  sigpic

                  1992 3b S2 Coupe

                  Comment

                  • s2driveruk
                    Super Moderator
                    • Jul 2003
                    • 12696
                    • Country: England

                    #54
                    quick check found this:



                    example quote for full pallet (1000kgs/72inch max height) from basingstoke to leicester as an example distance was £70+vat on a next day

                    If you can get the exact dimenstions then you might squeeze onto a half pallet?

                    Good luck
                    David
                    sigpic

                    1992 3b S2 Coupe

                    Comment

                    • fidoe
                      S2Forum Fanatic
                      • Mar 2006
                      • 75
                      • Country: United Kingdom

                      #55
                      cheers guys,

                      found another one called ETS online pallets - £44...not bad really and max weight is £450 (height under 90cm...)

                      will have a think about the RS2 intercooler...how much will the hardware cost? any good sources?
                      95 ABY Coupe...back on the road with new engine/oil cooler and bonnet!

                      Comment

                      • Acidburn
                        S2Forum Obsessed
                        • Jun 2007
                        • 13459
                        • Country: United Kingdom

                        #56
                        Rs2 intercoolers vary I've seen them cheap but most are around the 300 mark with the crossmember.

                        Comment

                        • Matt_D
                          S2Forum Maniac
                          • Dec 2004
                          • 515
                          • Country: United Kingdom

                          #57
                          I'd consider getting a mocal oil cooler instead of an o.e cooler, bigger one if possible

                          Why not take a day off and spend £50 on van hire ? (with tail-lift so you don't pop a pod lifting the engine)
                          Yeah ok you'll probably get it there cheaper using a courier but at least you know its there and has'nt been bashed about over speed humps
                          '95 ABY Avant - Sold
                          '98 B5 S4 -MRC400+ = 464ps 741nm

                          Comment

                          Working...