Flywheels

[Mark Halligan]

Interesting read.. I have an exceptionally light 3B flywheel with a six paddle sprung driven plate and must admit i have not heard the rattle.

I had a lightened 3B Flywheel before and never heard it either, I hear it only since I've been using the ally FW.

Mind you even though the rattle is a bit annoying I am very happy with the ally FW and wouldn't change it. I might try a slightly heavier Gearbox oil as that may help, but if it doesn't I'll easily live with it

[S2_Dave]

Linky

http://www.motorgeek.com/phpBB2/viewtopic.php?t=12248

Any idea on what that concoction of oil was that the M3 owners were using?

Thanks for the read.

I've looked through all my current favourites and my old emails to Doug and Corey - they mention the "concoction" as an idea, but don't actual say what it was .

EDIT: You found it whilst I was looking. That was it!!

[DJones]

probably because it's drowned out by your wife's
screaming

Lol,, True..

[Pirvu Eugen]

Ratle is the reason wy Audi has changed the cluch disk at 200 quattro 20V turbo with modified hub wich has some small springs to damp the vibrations. The 200 flyweel lighter then 3B S2 one. The sport cluches dont have those springs.
Hope this helps!
All the best!
Eugen