2.5 diesel block as stroker whats involved???

[K7ERG]

I have a 2.5 Diesel block from the AEL. I am looing at making a 2nd bottom end for my AAN.

I am looking for the parts i will need to make it a Stroker.

Crank
Pistons and piston sizes
Rods and sizes
Head gasket

Anything else i have missed.

Any help would be great.

Craig

[S2central.net]

A forum search should yield all the answers you need - or more specific threads related to individual aspects on the crank, rods etc etc

Good luck

[Flat on my back]

Question...

Have you got the 034 MLS thicker headgasket?

Could you measure one of the bore ID's on the gasket?

Ta.

[K7ERG]

I do mate but it has been fitted.


ok will search the forum.

Just wanted quick answers to the above. To see if there is any point doing a spare bottom end.

Craig

[newsh]

You will find most of what you need in Pisobiker's Stroker project thread.

[K7ERG]

Cheers mate

[Pirvu Eugen]

The reinz metal head gasket has 82 mm the bores.
Hope this helps!

[Pirvu Eugen]

The 034 compresion reducing gasket is the same...82mm..

[Avtor]

I have a 2.5 Diesel block from the AEL. I am looing at making a 2nd bottom end for my AAN.

I am looking for the parts i will need to make it a Stroker.

Crank
Pistons and piston sizes
Rods and sizes
Head gasket

Anything else i have missed.

Any help would be great.

Craig

http://www.audi-club.ru/forum/showthread.php?t=28125

[Avtor]

http://www.eurospecsport.com/engine5C4V.htm