Inlet manifolds flow test

[Acidburn]

Originally Posted by bram
Javad confirms that the RS2 IM has about 1 liter more volume.

Originally Posted by bram
The 3B IM has a volume of 3.3 liters

Interesting to know.

[Jamo]

This is old new, http://www.s2forum.com/forum/showthread.php?t=15343

I don't trust them flow figures as it's not done in a real world enviroment, plus flow is not everything, a high velocity is need to make torque.

[BRY]

If not, does anyone have an RS2 and S2 IM kicking around that they could fill with water to check the capacity?

If there IS a difference, does anyone have an RS2 IM for sale?

Cheers n

Si

Hi

[HPmuirt]

Well stop boasting and get in the kitchen then...Sheesh! (It's the room that your food magically appears from)

Just plug up the holes in both manifolds with cellotape, fill the RS2 one with water, then carefull decant the water out of the RS2 into the ABY and measure how much water is left (if any) in your wifes measuring jug. Then get told off for playing with dirty car parts in the kitchen

Once you have cleaned up the kitchen and made the wife a cuppa, you can go back to stripping eBay of any useful Audi parts

Cheers n tears (of frustration)

Si

1...2...3.......duck

[Flat on my back]

Eh...

No one want to know the capacity of the AAN manny?

[Acidburn]

Well it would be good if we could get as much detail about each of the manifolds, what they hold, flow etc.

[BRY]

Just to clarify:

does anyone have an RS2 IM for sale?

Cheers n

Si

[HPmuirt]

Just to clarify:

Stop waving at me and get your **** in the kitchen. The very fact that you have one for sale means that it is not attached to a car and therefore it should currently be full water in your kitchen....sheesh!

Cheers n

Si

[Flat on my back]

AAN volume...

measured at 3.05 litres...

Question is...volume or flow, or both, which is best?

[yodasfro]

That's interesting on the 3B vs. RS2 I thought the RS2 had a larger plenum? Well anyway I'm having a 3B hogged out for my 200 20v http://www.motorgeek.com/phpBB2/viewtopic.php?t=17525