Homefry+forge DV what spring?

[andyg plym]

Been reading some old posts and was wondering what spring to use in my forge recirc DV?
Green is in there at the moment, but i see you can have different colours relating to spring pressures.
Yellow springs are rated for 1.5 Bar, as the homefry is set to 1.4 shouldn't i be investing in the yellow one?
Or is that 1.5 at the red-line?

[Rocco]

Been reading some old posts and was wondering what spring to use in my forge recirc DV?
Green is in there at the moment, but i see you can have different colours relating to spring pressures.
Yellow springs are rated for 1.5 Bar, as the homefry is set to 1.4 shouldn't i be investing in the yellow one?
Or is that 1.5 at the red-line?

try with the blue spring and if you dont like it,try with the yellow with
1 or 2 washers....

[jameswkr]

FWIW - I run Forge with yellow spring (no shims) in reverse orientation (Jamo initiated the last thread I recall on this topic). Mine is still on standard ECU. Definitely worth experimenting to see if you/your car like it.

[Rusty]

Lellow, no shims