AAN Head Required

[hoffer76]

Whilst replacing the exhaust manifold, the usual sheared screws were found. Whilst easy-out'ing one of said screws, it was discovered that previous poking had drilled through to an oil gallery lying horizontally further in the head.
Can anyone advise where I can source a replacement head. Are any other heads compatible? (ABY/ADU etc). Can anyone advise which oil gallery is likely to be running behind the exhaust manifold screws? I am keen to understand how it could affect the turbo?

By the way - this is my first post so I'd just like to say Hi to the community!

Cheers

[Acidburn]

pm a user on here called spink he has one or two lying around.

[A80Avant]

i also have and adu and a aan head lying around.both have cracks adu>aan but i have been told they are repairable
i dont know how much the shipping to the UK from Greece would be..i got the one from germany for 100euros shipping..so it would probably be the same i guess...

[Flat on my back]

.

Carefully drill the hole into the oil gallery to a known size, then fit an alloy plug.

Its probably for the cam bearing caps oil feed...