RS2 Cam...

[rjga20]

Today I've bougth a supose RS2 cams how can I see if the cams are really RS2 cams??Here I see the numbers??or reference??Only numbers I can see was: 034 102 G; 034 AM.

[Nuvo]

The exhuast cam should read 034 109 022 G, the intake should be 034 109 021 AN.

[rjga20]

Yes I know but here is this numbers in the cam????

[UrS4boy]

The exhuast cam should read 034 109 022 G, the intake should be 034 109 021 AN.

AFAIK, the RS2 intake cam is the same as the AAN (and ABY?). Also the RS2 exhaust cam had two letters, an early one, "F" and a later one, "G". If you go into ETKA under Part Number with 034 109 022 F, you will find that after 30/09/97, "G" is the correct letter.

[rjga20]

Hi
I've ETKA but I can't see here is the part number in the cam...I only whant to know if this cams was RS2 cam, here i can see it??Because I don't find the part number!

[ur-s4315]

My RS2 has these numbers on the camshafts EX: Mon5...9258...95H IN: 034AM but I'm not sure if the exhaust is the right one. I've measured the lift of the exhaust and it is 9,5mm.

[mcandmar]

Numbers on the cams dont fully match the part number in ETKA, 034 102 F or G on the cam sounds right. As above measure the lift to verify.