Homefries boost figures

[bertman]

I am sure there is a thread on this somewhere but I cannot find it.
Just wanted to know what the maximum boost figures for each gear should be with a healthy homefried Aby

[nip]

i see 20 to 23psi in all gears except 1st

[johne]

1.4 bar, 20 PSI in any gear unless limited by any of the protection mechanisms

[Jamo]

Yes there is, i have a thread posted up.

[Rusty]

there's a boost graph I posted in the gallery too. You shouldn't see any difference in boost other than 1st and maybe 2nd.

[max_s2]

Stupid question: what's a homefrie?

[nip]

hi lv,max its a chip done by paul at s2 central , from standard 230bhp it takes it to approx 280, its well worth it

[max_s2]

And how much EUR/GBP for it?
Is it possible to add it myself to ECU?

[nip]

you have to send ur ecu to ireland to paul, not sure how much it is mate

[Jamo]

ABY Homefry boost / gear profile

1st: 0.4 bar
2nd: 1.2 bar
3rd: 1.4 bar dropping to 1-1.2 bar
4th: same as 3rd
5th same as 3rd
6th: same as 3rd

http://www.s2forum.com/forum/showthread.php?t=10806

[Rocco]

And how much EUR/GBP for it?
Is it possible to add it myself to ECU?

what are you doing waiting??? go for it,the car will be much more fast and fun like 1000 times

[Jamo]

I think paul can also send you the chip but ideally you should send him your ecu as a socket needs to be welded into it.

[HPmuirt]

I think paul can also send you the chip but ideally you should send him your ecu as a socket needs to be welded into it.

Welded?

I've gotta MIG welder, will that work or do I need a gas torch?

Cheers n

Si

[Rusty]

You do that mr Muirt, I'm sure your car will go faster as a result

[bertman]

ABY Homefry boost / gear profile

1st: 0.4 bar
2nd: 1.2 bar
3rd: 1.4 bar dropping to 1-1.2 bar
4th: same as 3rd
5th same as 3rd
6th: same as 3rd

http://www.s2forum.com/forum/showthread.php?t=10806

Cheers for the figures Jamo

What point in the rev range should you see a drop off in the boost?