You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Hello, my motor runs up to between 13 and 15 psi on the gauge at full throttle, lowering as the revs increase, does anyone think that is ok, or is there more to come from it. It is a standard motor, but has been mapped in the past.
It now also has a full miltek wide exhaust on it, could that change its behaviour since it has not had any mapping to go with this.
Thanks, bernie
dunno to be fair, i would expext it to be standard, and its an aby
Then it would have a 250 kPa (2.5 Bar) MAP and should hit about 16 psi stock. Remapped should push towards 20 - 21 psi with the 2.5 bar MAP. As a result, you might have a boost leak somewhere if all you are getting is 15 psi max.
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment