Where is the best / cheepest place to get a crankshaft locking tool? I remember seeing ones on ebay not so long ago and tbh i thought the price was a bit steep.
Crankshaft locking tool
Collapse
X
-
I'd make one but don't have access to a welder at home.
I'll try the dealer, do you have a part number? There will be no chance of getting it from my local Audi dealer without one. Last time i went into get parts i had to go arround the counter and find them myself as i left the part numbers in the house and he didn't have a clue!! Usless c#@ts
Comment
-
2084 for the 7A / 3B
3256 or the ABY / AAN / ADU
HTH
EDIT: Try this for pics too
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
-
Come these guys are not that bad i get on great with them mind you the case of beer at Xmas adds to them being more than helpfull when it comes to price'sI'd make one but don't have access to a welder at home.
I'll try the dealer, do you have a part number? There will be no chance of getting it from my local Audi dealer without one. Last time i went into get parts i had to go arround the counter and find them myself as i left the part numbers in the house and he didn't have a clue!! Usless c#@ts
cheers RajComment
-
I used to have no problem there when (i forget his name) the big tall guy was there.
With out a word of a lie, i ordered and paied about 150 quids worth of parts 2 Wednesdays ago and was told they would be in on friday, went through to get them on monday after. Was told to "not in try back tomorrow" when i said you told me friday he replyed "try back tomorrow" to whitch i replyed to i stay 25 miles away could you give me a phone when they get in, if i'm not in leave a message on my answer phone. Was speaking to the wife last night and she said they hadn't phoned. I suspect the parts are in but too lazy to ring me.
I'm planning speaking to vw and seeing if they can order Audi bits for me, always got a great service from themComment
-
3256 does not fit the ABY/ADU with aircon. You will need the 2084 for that.2084 for the 7A / 3B
3256 or the ABY / AAN / ADU
HTH
EDIT: Try this for pics too
http://www.s2forum.com/forum/showthread.php?t=5042
BTDTComment
-
-
Dont need them with mine i just welded a long piece of round bar along the back of it so you can just leave it on the deck or get someone to hold it
Theres two tall guys the older one is david but you do not see him parts vey much as he is on warrenty work then there is mark he is the young one he is brilliant at his job then colin he is incharge of parts and is fine to deal with aswell
cheers RajComment

Comment