oil caugh can

[rs200]

my small project start before one week, and i decide to do a "oil caugh can".

i was using a reciclator from air condition.
cut them on 2 pices:






inside is one pipe and some filter.
i take this out :


put inside is one plastic (something).
i fit that back because the air mix with oil can fall down.






on the ohe other side must be one whoole that you can pull the oil out.




tomorow will be ower because can have to be fited together.

i use this reciclator from audi v8.
with few modification i have a original AUDI oil caugh can....

[Bram]

This is the wrong forum to place this topic. I would move it to the Engine topic

[Knight Rider S4]

Good recycling of parts!!

[rs200]

i'm sorry if i put a thread in wrong place.


it's not a recycling of parts ,it is using a original audi parts for something. must stay OEM.

i spend a 10 euro for a can, if you want to buy a new one, you will spend 150euro.

[rs200]

the oil caugh can is ready.

they are all ready in car waiting for an engine..