WOT issues on 3B

[Rocco]

i have more or less the same problems as you mate

only load around 1´3bar and the software was desingned for 1,8bar in 3rd gear and 2.0bar in 5th gear

i have broken the distributor pipe,and i think that it is the problem,because it lost some part of the plastic.

today or tomorrow i am going to change the 5 sparks plugs (Bosch F5dpor),5 new sparks wires,distributor pipe,dristributor cap and both knock sensors...all of course for new originals parts

i hope that after change these parts my car will continue boosting normal

[newsh]

When the MFTS goes wrong it can reduce boost, unplug it and it comes back.

[Rocco]

When the MFTS goes wrong it can reduce boost, unplug it and it comes back.

upplug it and plug it again?? it is some kind of reset for the ECU fail?

[newsh]

No, unplug it and leave it unplugged and see if you get more boost, I think you'll get the temp warning light..

[Rocco]

No, unplug it and leave it unplugged and see if you get more boost, I think you'll get the temp warning light..

OK understood

thank you