IAT & ignition retard at wich temperature?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackS2
    S2Forum Addict
    • Apr 2010
    • 455
    • Country: Germany

    #1

    IAT & ignition retard at wich temperature?

    hi,

    does anybody know at wich intake air temp (G42) temperature the MOTRONIC starts to retard the ignition??

    cause I'll prove if dimensions of my intercooler are well matched...

    thx

    J
    [__]=oooo=[__]
  • porkkis
    S2Forum Extremist
    • Aug 2003
    • 1994
    • Country: Finland

    #2
    It depends on software version and whether your tuner has changed it.
    -

    Comment

    • Rusty
      Super Moderator
      • Jun 2004
      • 18953
      • Country: United Kingdom

      #3
      And if it's an ABY then it reduces boost with lower IAT so fitting a larger IC won't ahve quite the same effect as it will on a tuned, 3B or RS2
      Cheers'en, AndyC
      1994 ABY Coupe - Projekt Alpinweiss

      Comment

      • blackS2
        S2Forum Addict
        • Apr 2010
        • 455
        • Country: Germany

        #4
        stock RS2 ecu
        [__]=oooo=[__]

        Comment

        • porkkis
          S2Forum Extremist
          • Aug 2003
          • 1994
          • Country: Finland

          #5
          In ADU sw there is a clear step at slightly below 40C and after that only very few degrees is retarded. There is actually no temp threshold value for retardation but an intake temp correction map instead. Of course the value is also interpolated between each map point so it's about linear.
          -

          Comment

          • blackS2
            S2Forum Addict
            • Apr 2010
            • 455
            • Country: Germany

            #6
            thx
            [__]=oooo=[__]

            Comment

            Working...