28 psi (2bar) boost on RS2'd 3b?

[vertigone]

Friends here are running RS2 mod on 3b and they get 1.9bar to 2.2bar in fifth gear

[PeterS]

So no issues with ignition cross fire?

Mike's concern is that he felt he had a cross fire at 22psi...
and this is with a new metal geared distributor, new narrow rotor, new wires, etc.

Those who have bent rods, was it do to cross fire or damage from too much torque (beyond the stock rod limits?)

[PeterS]

i was runing in my 3B a software from Hamon Motors for RS2 specs with of course RS2 turbo and YES 2.0bar in 4th and 5th gear ,without any problems and the AFR were between 11´3 / 11´8 with RS2 injectors and 7A FPR in WOT.

and 1´8bar in 3rd gear....

Stock ignition ? Narrow rotor?

[Rocco]

Stock ignition ? Narrow rotor?

yes for me Peter¡¡

but i have to say that i was using it with ALL NEW ( distributor rotor, spark plug wires,spark plugs bosch f5dpor,batery,knock sensors,turbo,exhaust manifold,injectors...ALL..)