any help please!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vader s2
    S2Forum Enthusiast
    • Mar 2008
    • 141
    • Country: Ireland

    #1

    any help please!

    hello gents. i have a 90 coupe 10v ng code. i am having problems starting the car.
    it is turning over but won t start. can anyboby tell me what to check i was thinking
    fuel pump? but when i try to start the car there is a strong smell of fuel. you could normally hear the pump kick in . but not now any advice?
  • Acidburn
    S2Forum Obsessed
    • Jun 2007
    • 13459
    • Country: United Kingdom

    #2
    also check you've got a spark, I had a 10v a while ago that just stopped one day, the dizzy had packed up, once swapped was fine.

    Can you hear the fuel pump priming at all?

    Comment

    • vader s2
      S2Forum Enthusiast
      • Mar 2008
      • 141
      • Country: Ireland

      #3
      any help please!

      Originally posted by Acidburn
      also check you've got a spark, I had a 10v a while ago that just stopped one day, the dizzy had packed up, once swapped was fine.

      Can you hear the fuel pump priming at all?

      i did check to see if i had a spark. it did but did not seem to strong and you can t hear
      the fuel pump priming. thanks for your input.



      paul

      Comment

      • newsh
        S2Forum Obsessed
        • Aug 2003
        • 16226
        • Country: United Kingdom

        #4
        If you only get one spark per revolution on cyl 1 then it could well be the hall sensor or dizzy gear, pull the cap off the dizzy and make sure its going round .

        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment

        • Ryss
          S2Forum Addict
          • Nov 2009
          • 233
          • Country: South Africa

          #5
          Assuming your spark is OK.
          Try removing the aircleaner and feel if the airflow plate is rising when the car is started. Could be your deceleration valve or idle stabilization valve that is letting air bypass the airflow plate.
          You can push the plate up a little and this will supply some fuel.
          Regards
          Ryss
          www.autostart.co.za

          Comment

          • vader s2
            S2Forum Enthusiast
            • Mar 2008
            • 141
            • Country: Ireland

            #6
            any help please!

            thanks for the input lads. will try again today.


            paul

            Comment

            Working...