V6 AAH Help!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • S2central.net
    Retired OG Mod
    • Jul 2003
    • 16590
    • Country: Northern Ireland

    #16
    4th of four... just two files here
    Attached Files
    Paul Nugent
    Webmaster http://S2central.net
    Administrator http://S2forum.com

    1994 S2 Coupe ABY - aka Project Lazarus
    2001 A6 allroad 2.5TDi - family tank
    2003 S4 Avant 4.2 V8 - daily burble

    Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

    There are only 10 kinds of people that understand binary - those that do, and those that don't

    Comment

    • S2central.net
      Retired OG Mod
      • Jul 2003
      • 16590
      • Country: Northern Ireland

      #17
      This one shows dipstick & o-ring (23)
      Attached Files
      Paul Nugent
      Webmaster http://S2central.net
      Administrator http://S2forum.com

      1994 S2 Coupe ABY - aka Project Lazarus
      2001 A6 allroad 2.5TDi - family tank
      2003 S4 Avant 4.2 V8 - daily burble

      Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

      There are only 10 kinds of people that understand binary - those that do, and those that don't

      Comment

      • KRIMZONQUATTRO
        S2Forum Buff
        • Jan 2011
        • 32
        • Country: United Kingdom

        #18
        Originally posted by S2central.net
        This one shows dipstick & o-ring (23)
        DUUUUUDDDEEE!!!!!! Thankyou soooo much for going out your way to post that lot up for me. I'm sure it'll probally help other people that reads this thread aswell...but either way it helps me.
        Cheers Again.

        Comment

        • KRIMZONQUATTRO
          S2Forum Buff
          • Jan 2011
          • 32
          • Country: United Kingdom

          #19
          Originally posted by JMLAudi
          Hiya

          After removing securing bolts of the dipstick and the heat shields on exhaust manifold lever dipstick from the sump side.HAVE BATTERY DISCONNECTED...as as you wiggle it free it can short out on the starter motor



          The water pipe is secured bythe 10mm bolt on the top of the engine V

          IF i remember correctly both pipes are secured by 4, 8mm bolts on back of head,
          you must pull pipes free backwards to wards firewall........the o rings hold the pipes very tight

          twist metal pipes 90 degrees to clear heads as you remove them
          There are bits i forgotten(sorry),,,,,,,,,, but as you work it will come clear.



          cheers
          jjohn
          Hey, man, that helps alot also!!! Cheers

          Comment

          • JMLAudi
            S2Forum Maniac
            • Dec 2009
            • 520
            • Home: South Africa Current: United Kingdom

            #20
            Cheers



            Its been a few years since i was iin workshop..so i a bit ruusty on memory....hoping i remembered enough to be usefull


            cheers
            john

            Comment

            Working...