Photo of the inside of an ABY Sump - please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • macspring
    S2Forum Zealot
    • Mar 2005
    • 6371
    • Home: Ireland Current: Wallis & Futuna

    #1

    Photo of the inside of an ABY Sump - please

    Does anyone have a photo or two of the inside of an ABY sump ?

    Also how hard and what's involved in taking off a sump for a healthy road going car, i.e. one that is not being parted or having it's front suspension components being refurbished.

    Thanks in advance.
  • AndyP
    S2Forum Zealot
    • Feb 2004
    • 6049
    • Country: England

    #2


    Just in the middle of doing this myself, so I'll report back tomorrow as to how tricky it is.
    sigpic
    1991 Audi S2 3B - 2.5 Stroker engine
    1997 A6 2.5TDi quattro avant - C4
    1976 RD250E / 350LC cafe racer

    Comment

    • cooperquattro
      S2Forum Maniac
      • Jan 2011
      • 815
      • Country: United Kingdom

      #3
      PITA is the answer..engine up or subframe down

      Comment

      • Avantus
        S2Forum Maniac
        • Sep 2007
        • 941
        • Country: Belgium

        #4
        Not so great quality however.. and supposing that the ADU sump is the same as ABY



        Dit it again about last week, and on a ramp I did it in 30 minutes, nothing to it

        Just loosen the rear subframe bolts, and take out the ones in the front (4 times an 18)... it'll drop a fair amount so you can easily reach the ones at the rear of the sump.

        For getting it back on, the 2 you have to put in trough the holes in the gearbox can be a bit tricky though! Do those at the beginning, because when you drop them in the sump you can take it off again
        Attached Files

        Comment

        • cooperquattro
          S2Forum Maniac
          • Jan 2011
          • 815
          • Country: United Kingdom

          #5
          most of us are on our backs here..no luxury of a ramp...looks to be no plastic baffle in sump as to someone elses post this week

          Comment

          • macspring
            S2Forum Zealot
            • Mar 2005
            • 6371
            • Home: Ireland Current: Wallis & Futuna

            #6
            Originally posted by cooperquattro
            PITA is the answer..engine up or subframe down
            That's what I feared. Thanks.

            Comment

            • macspring
              S2Forum Zealot
              • Mar 2005
              • 6371
              • Home: Ireland Current: Wallis & Futuna

              #7
              Originally posted by AndyP
              http://www.s2forum.com/forum/showthr...=removing+sump

              Just in the middle of doing this myself, so I'll report back tomorrow as to how tricky it is.
              Any close up photos to show the areas inside is what I'm keen to observe. I want to work out what's left in the sump if one uses a pipe in through the dip stick to suck out the used oil when changing the oil and the oil filter. I also open the oil cooler connection pipes separately to get a bit more old oil out at this point in the oil system.

              "two grumpy kids and the odd fight with the missus about 'that bloody car".

              Loved this bit from Paul's write up seemed scarily familiar. His write up is has all of the emotion I experience when working on these S2s, he conveys it so well.

              Thanks again.

              Comment

              • s2_wot
                S2Forum Fiend
                • Aug 2006
                • 2178

                #8
                Can I ask why you are going to remove it David? Subframe down is your best bet imo based on what I was at today.
                Shane

                Comment

                • macspring
                  S2Forum Zealot
                  • Mar 2005
                  • 6371
                  • Home: Ireland Current: Wallis & Futuna

                  #9
                  Not wanting to take it off.

                  Just want to know what's inside.

                  Given your propensity for taking things apart to see what's inside, I await your photos of your sump, if that's OK.

                  Thanks, Shane.

                  Comment

                  • s2_wot
                    S2Forum Fiend
                    • Aug 2006
                    • 2178

                    #10
                    From earlier today, tomorrow there will be sump photos for David
                    Attached Files
                    Shane

                    Comment

                    • AndyP
                      S2Forum Zealot
                      • Feb 2004
                      • 6049
                      • Country: England

                      #11




                      This is mine from today. It's a tricky job to do with the engine in the car, not too bad getting it apart but trying to get the sump, gaskets and windage tray back on is very tricky. You need to patience of a saint!
                      sigpic
                      1991 Audi S2 3B - 2.5 Stroker engine
                      1997 A6 2.5TDi quattro avant - C4
                      1976 RD250E / 350LC cafe racer

                      Comment

                      • V6quattro
                        S2Forum Maniac
                        • Sep 2008
                        • 949
                        • Country: Netherlands

                        #12
                        Are you sure this is from a ABY? My ABY sump didn't have a plastic thing.
                        1360kg/600Whp Avant 0-200km/h 9sec

                        Comment

                        • macspring
                          S2Forum Zealot
                          • Mar 2005
                          • 6371
                          • Home: Ireland Current: Wallis & Futuna

                          #13
                          Andy,

                          Perfect photos thanks.

                          Do you have a photo of the oil pick up ?

                          And was it clogged ?

                          Thanks again.

                          Comment

                          • s2_wot
                            S2Forum Fiend
                            • Aug 2006
                            • 2178

                            #14
                            Opened mine today, the oil pickup was far from blocked but you can see the piece of metal swarf that was in there
                            Attached Files
                            Shane

                            Comment

                            • macspring
                              S2Forum Zealot
                              • Mar 2005
                              • 6371
                              • Home: Ireland Current: Wallis & Futuna

                              #15
                              Just a chip off the old block, nothing to worry about.

                              Comment

                              Working...