Name that part

[HORCH]

well I've got my cylinder head on and I'm about to put the camshafts in, so I thought I'd ask in advance where this plastic bit goes, I'm pretty sure it goes in the rocker cover but where I dont know or how it fits? and where do these clips go and the bit of pipe? I think the pipe goes on the turbo or wastegate and its normally blanked off with the orange rubber cap but its perished? thanks

[willg54]

The plastic bit sits ontop of the cam retainers, front of the inlet cam beneath where the oil filler cap would go when the cam cover is on. just a push fit!

not sure about the pipe

[willg54]

bottom right clip in your pic is the one that hold the throttle cable onto the throttle body rocker

[jade]

Others

Injector clips

Pipe maybe the coolant feed for the turbo

[saltinot]

The pipe is the "sniffer port" from the exhaust manifold

[RoadKill]

pipe comes off down pipe , i have a longer one on my 2.0 8v coupe the 20v had a small one

[mcandmar]

Its the CO takeoff pipe from the downpipe, only fitted to 3B cars afaik. 5 Clips are injectors, two on the far right are to hold the the throttle cable onto the throttle body.

[RoadKill]

dam it beaton by 1 min

[jade]

The pipe is the "sniffer port" from the exhaust manifold

sniffer port ? do you have a pic ?

[jade]

sniffer port ? do you have a pic ?

Ok got it, never did 3b stuff

[Tonks4x4]

Parts are as follows....

Plastic part is the oil deflector just sits on top of the camshaft retainers before the rocker cover is fitted.
Part No: 034 103 553D

The steel pipe is an adapter for performing CO tests and fits into the downpipe
Part No: 034 192 703N

The 5 metal C clips are injector retainers to the fuel rail
Part No: 035 906 037

Top right metal clip is a throttle cable retainer
Part No: 893 129 559A

Bottom right metal clip is also throttle cable retainer
Part No: 811 721 673A

[HORCH]

aahhhhhh right! thanks everybody you's must have a good memory haha, I'll write those numbers down aswell for future reference, I didnt take it to bits you see and theres a little box of bits like this, so I know where to come if I need to find out what they are

[HORCH]

well now its name that missing part! can somebody tell me what goes here please? its the back of the cylinder head and has anybody got a picture?

[mcandmar]

Ok, if you have torqued that nice clean head gasket down your not going to like this. The large hole should have a core plug in it sealing off the coolant jacket. The small threaded hole is the engine temp sensor, has a white 2 pin plug on it.

[HORCH]

dam it, surely I wont have to take the head off though?