How do you check the fuel pressure on an RS2 ?
-
-
Ummm....with a fuel pressure gauge, Tee-d into the fuel line, using an adapter like the one from 034?
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant -
ok thanks.Comment
-
And to pre-empt the next question... on an RS2 ... you should see 3.8bar +/- manifold pressure on the fuel rail
so at 0.5bar vacuum on idle you get 3.3bar on the fuel pressure gauge
and at 1.5bar boost you should see 5.3bar on the fuel rail... this is pretty tricky to prove of course unless looking under the bonnet at a dyno for example... unless you have an emulator and a hand pump to fool the ECU into letting you idle with silly high fuel pressure.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
Comment