S6 oilcooler into ABY S2 Estate...?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ian Simmonds
    S2Forum Fiend
    • Jun 2005
    • 2858
    • Country: United Kingdom

    #1

    S6 oilcooler into ABY S2 Estate...?

    Are they the same item? Or compatible as a straight swap? Only I've got an S6 AAN one here.

    Edit.... Also got a Ur quattro turbo one here, don't suppose that's the same either is it?

    VBR
    Ian
    85 WR Urquattro, 85 20vT International liveried RallyRep
    93 MTMS2 Avant
  • UrS4boy
    S2Forum Obsessed
    • Feb 2006
    • 11859
    • Country: Canada

    #2
    Not the same. UrS6 = 034117021B which is common to the turbo C3 (Type 44), 200 Vt (3B) and C4 UrS4/S6 but not into the smaller B3/B4. Furthermore, my friend Kate tells me that for an S2 the 3B oil cooler (PN 113117021X) is different than the ABY oil cooler (PN 034117021D). She says the ducting is different too. That said, the ABY and AAN coolers *might* be close. (3B looks like something altogether different). You would have to have them side by side to figure it out for sure.

    Last edited by UrS4boy; 4 July 2011, 23:30.
    RS2'd 93 UrS4 5 spd sedan
    94 UrS4 V8 6 spd manual avant

    Comment

    • Ian Simmonds
      S2Forum Fiend
      • Jun 2005
      • 2858
      • Country: United Kingdom

      #3
      Thanks bud, it's hard to tell without a full stripdown of all three items, and as the S2 goes to work most days it's a bit inconclusive at the moment...

      I'll pull the Ur oilcooler out of the garage this week and have a 'guesstimate' with the S2's in situe... The S6 one is on the Rally car, so I'd involve a 3 way swap.

      It's a laugh, isn't it...
      85 WR Urquattro, 85 20vT International liveried RallyRep
      93 MTMS2 Avant

      Comment

      Working...