Good work. I'm tempted to get a 19 row for mine now. The 13 row should be ok for the PAS.
-
SS -
on the 235mm x 19 row, whats the distance between the mounting points?1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
-
cheers
1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
More photos....RS2+ (now sold...)Comment
-
and more....RS2+ (now sold...)Comment
-
...... and just for the record, it was a total PITA with bells on to fit the cooler, hoses and everything else back into that small space. It is doable but....
If anyone needs a length of hose, I've enough to do one hose. Send me a PM.RS2+ (now sold...)Comment
-
Nice work. Having a good look at mine the other day, it's only a matter of time before I need to do something like this. PAS cooler sounds like a plan too
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Did you make a template so that bracket could be replicated?Comment
-
No. I found that the tricky bit in making the frame is working out where and at what angles to cut the OEM bracket. As I found out, the final cut line does not look right when the bracket is off the car. I think that is is best identified by marking up in situ, rather than following a template. The OEM bracket is all curves and angles so it's hard to even say 'measure x from here'.
Once you tack on the cut bracket to the new frame you can fit up and tweak it into place before final welding. The rest of the cooler frame is very straightforward.RS2+ (now sold...)Comment
-
Excellent photos Lloyd, even though they took a while for me to download. Thanks for posting those up.
Tell me about the plumbing nightmare.
SSComment
-
I told you it would be tight! Looks like mine now, a proper rats nest of hoses and wires. Looks like I'll have to upgrade mine now you've proved it fits.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racerComment
-
Hang on a sec, I've yet to confirm the undertray fits.
RS2+ (now sold...)Comment
-
i've joined the crew and got my 19row cooler today going to put it in the aux rad position though.
1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
Thats where I'd put it too. have to say I would be concerned about a larger cooler in the stock location, very vulnerable to damage from debris etc.
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
Comment