On the spread sheet pin 50 VSS where does this wire too vehicle speed sensor ? Where or what wires are going to the Hall Sensor ?
Also what cable size should i use for the coils ?
Also what cable size should i use for the coils ?
-
Last edited by ian4455; 29 February 2012, 12:14. -
I have a 3 wires to the 3b coil connector. These are Black = earth, Brown/White to ECU plug pin 14 and a Green/white to ECU plug pin 1 not required. The Brown/Red a switched 0 Volt from ECU. Best place to find a fused 12 Volt + ??
Last edited by ian4455; 2 March 2012, 18:47.Comment
-
+12V and ground use from old (3b) single coil . they allredy have fuse in box.Comment
-
With the good weather yesterday i took the time to complete the coil pack wiring, quite pleased with the results.
Comment
-
EXCELENT !
when you start the car , please take your video camera !
Comment
Comment