500+ bhp build

[jsws3]

I'm new to this old school engine build and would like a rough cost for building a engine to 500+ bhp .
A little about the car it's a ur quattro with a s4 engine with a remap and exhaust about 280bhp ish .
I need to know what parts I need and where to get he parts for a good price .
I will need every thing
Clutch
Turbo what type
Injectors
Rods
Pistons
Inlet manifold
Exhaust manifold
Ect ect
Can some please help

[rs200]

there is a lot of ways to get 500+hp
clutch - use SACHS performance - ebay
pistons can stay stock
rods take from forum member Aromatic2 , I use his rods on 4 engines and they are perfect.
for other things talk with other forum members.
what kind of flywheel do you have ?

[jsws3]

It's a mb gear box 5 speed and not a s4 6 speed .
And I think it would be a standard clutch from the mb engine .
If that helps .

[JP]

I once worked out that if you were to build it yourself you'd spend around £5000-5500 in the uk.

[jsws3]

Where is the best place to sauce parts from ?

[Acidburn]

Where is the best place to sauce parts from ?

rods - aronmatic2 on here
shells, arp's - aelred on here
piston rings - rwd19t
exhaust manifold - wagner
turbo - hoffer on here

[europeanme]

Where is the best place to sauce parts from ?

HP!!!...

like it...

ebay.de is a good place to start after the list Pete has posted...

[jsws3]

Aelred is going to build my engine but he is not going to start it until July when the car comes out of storage but I wanted to make a head start on getting the bits together and to know what bits I need.
as I think 500hp is abit tame and might go for 600hp if it will still drive nice .

[Jamo]

If Aelred is building your car he will advise Pauter rods
Damn quality they are

[Tonks4x4]

HP!!!...

Lol!!! On a bacon cob?

[Jamo]

This thread is your guide http://www.motorgeek.com/viewtopic.php?f=6&t=32078 using Wagner parts

[jsws3]

Thank you mate

[prj]

This thread is your guide http://www.motorgeek.com/viewtopic.php?f=6&t=32078 using Wagner parts

I'd say a lot of money has been used for not much result in that thread with the 3071 turbo.
For the same money he could have built a 700 hp car, would've made no difference at all to the cost, as he already did all the parts.

Realistically...
GT30R with 0.82 hotside, head job, manifolds, cooler, fuel and a remap.
That will give you a STABLE 500+. EGT's will stay nice as well.

Full boost by 4100 rpm in 3rd also...

BTDT.

[Jamo]

Guide as in fitment of part to the UR, turbo choice is up to the member

[cooperquattro]

as I think 500hp is abit tame and might go for 600hp if it will still drive nice .[/QUOTE]

500 is no way tame and also not easy to drive,
it wont drive nice at either VERY laggy