Best coils for conversion?

[prj]

I can get you a loom made.
About 170-190 EUR, depending on current material prices...

And I can send you the fuel chip with the updated dwell time for the coils as well

[lcsmith]

Did I say pretty good? .......I meant awesome!

[UrS4boy]

...If you do a search you'll find a couple of threads on coil pack conversions, URS4boy did a pretty good write up on it.

Umm...pretty good? Show me a better one.

http://forums.quattroworld.com/s4s6/msgs/183485.phtml

[Rocco]

i am using 2.5tfsi coils...for around 35 or 37 € each...thats not bad and they works¡

[lcsmith]

Hi all,

I'm looking/going to buy a loom for converting to tfsi coils, buy I couldn't really
find what the best coils are?

I'm finding, 06E905115D, or F, or E ... what's best?
Are non-Audi Beru ones also OK?

Thanks!

Oh and if anyone has a good connection or site for buying them, let me know.
On ebay they ask 4-500€ for a set of 5 not that expensive coils with a home made wiring...

Don't know the differences, but I've just bought a set of 5 Red Coil Packs from ebay.com, part number 06E905115E, link;
http://www.ebay.co.uk/itm/2709669210...84.m1497.l2649

I've also bought all the connectors and parts required to make up a wiring loom for it from www.finjector.com

If you do a search you'll find a couple of threads on coil pack conversions, URS4boy did a pretty good write up on it.

[europeanme]

AFAIK the only difference between them are the colours...other than that they are similar, if not, the same part....

I've been 'shopping' for these and it seems the R8 has the same coils on as the A3!!!...only the colours vary...

I could be wrong on this....

HTH
cheers
Mike

[Avantus]

Hi all,

I'm looking/going to buy a loom for converting to tfsi coils, buy I couldn't really
find what the best coils are?

I'm finding, 06E905115D, or F, or E ... what's best?
Are non-Audi Beru ones also OK?

Thanks!

Oh and if anyone has a good connection or site for buying them, let me know.
On ebay they ask 4-500€ for a set of 5 not that expensive coils with a home made wiring...