You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Building new AAN motor and putting 7a cams. Do i need adjustable cam gear or do i use original AAN gear? If i need it what do i put it on approximately fist start? Retard or advance? Same orientation as standard i guess. Want to make as little work possible for the guy mapping the car.
Yeah, I belive you need the adjustable cam gear for the exhaust cam and the adjustable cam sprocket for the intake cam to setup the cams properly. With stock marking you get a quite laggy setup... You can first try to adjust something between 0,8-1,2mm for the exhaust cam and 1-1,5mm for the intake cam at TDC.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Yeah, I belive you need the adjustable cam gear for the exhaust cam and the adjustable cam sprocket for the intake cam to setup the cams properly. With stock marking you get a quite laggy setup... You can first try to adjust something between 0,8-1,2mm for the exhaust cam and 1-1,5mm for the intake cam at TDC.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment