Unplugging brittle coilpacks

[Ian Simmonds]

Any advice on unplugging and swapping around coil packs? The electrical connectors are really brittle and I'm fearful to get it heavy handed and bu??er the thing up.

[Razzo4112]

i had the same problem when changing mine. i ended up changing the lot. it was extremely difficult to get the connectors off without braking them.

[jade]

Any advice on unplugging and swapping around coil packs? The electrical connectors are really brittle and I'm fearful to get it heavy handed and bu??er the thing up.

As far as I am aware they do not unplug they come with wires to wire in

[Razzo4112]

that might be why they wouldn't uplug

[Ian Simmonds]

Okay, so where do they 'disconnect' to be able to swap coils over?... Beru coils for the S2 are available separately, it's not a cut and soulder job is it?...

[mcandmar]

There is no connector on them, so when you buy new coil packs like the berus you have to solder them onto the plugs.

[Ian Simmonds]

There is no connector on them, so when you buy new coil packs like the berus you have to solder them onto the plugs.

Ah, right, got ya... thanks....