Rs2 Water pump

[bilko0795]

As title i will be doing all the belts in the next month or so just wondering is there any benefit in fitting the Rs2 water pump and belt.

[nip]

As title i will be doing all the belts in the next month or so just wondering is there any benefit in fitting the Rs2 water pump and belt.

The rs2 pump has a 1 less tooth so will probably flow faster, and i think the cambelt is the same so would have to be a tooth out i remember reading about this before, as far as i can remember

[bilko0795]

Thanks

[Error404]

IIRC the belt is different too

[UrS4boy]

IIRC the belt is different too

Correct. RS2 = 150 teeth, AAN/ABY = 151 teeth

http://forums.quattroworld.com/s4s6/msgs/131710.phtml

[nip]

[QUOTE=UrS4boy;692524]Correct. RS2 = 150 teeth, AAN/ABY = 151 teeth

http://forums.quattroworld.com/s4s6/msgs/131710.phtml

[img]http://12v.org/urs/AAN3BandRS2TimingBelts.

That's what I meant the rs2 belt is the same as the pump a tooth short lol

[bilko0795]

Thanks So is there any benefit to going the Rs2 route.

[Error404]

the RS2 pump spins faster at all RPM so it should flow more coolant than the S2 one = more efficient cooling

[bilko0795]

Cheers Alex.

[bilko0795]

Correct. RS2 = 150 teeth, AAN/ABY = 151 teeth

http://forums.quattroworld.com/s4s6/msgs/131710.phtml

Thanks for the info.