what rods do i need ?

[Rocco]

I agree, the rods look great. I have an exhaust manifold + 4inch downpipe made by Hank. If you're after quality I would def consider one, and he's always really helpful if you need any advice.

so did he build that custom downpipe for your setup because you will use his manifold true? ...interesting... because i will need a bigger downpipe if i can

[Thuppu]

Tomas, nothing is enough for you.

BTW, really nice loocking manifold and DP.

[Pat D]

so did he build that custom downpipe for your setup because you will use his manifold true? ...interesting... because i will need a bigger downpipe if i can

He sure did, the work is superb. The welding is the best I've come across. Send him an email, I'm sure he'll be happy to do whatever work you need done

[Rocco]

Tomas, nothing is enough for you.

BTW, really nice loocking manifold and DP.

Got a gtx3582 ready to tune ....and full 3" turbo back... I bet your exhaust system is better than mine
And that's my last power upgrade ,so there are.limits

[Rocco]

He sure did, the work is superb. The welding is the best I've come across. Send him an email, I'm sure he'll be happy to do whatever work you need done

We are in contact dealing with a wastegate....

Thanks for.your feedback!

[|CL|NIKI]

The GT 3076r with .82a/r I enough for up to 550hp. And will push hard from 3800 to 6800 at 2bar. You don't need so big down pipe- 3" are enough for this hp even fore more.

[|CL|NIKI]

Tomas, the 3" dp is enough for even 800 hp that are absolutely dream for this teen turbo

[Rocco]

The GT 3076r with .82a/r I enough for up to 550hp. And will push hard from 3800 to 6800 at 2bar. You don't need so big down pipe- 3" are enough for this hp even fore more.

Got now a gtx3582..82ar and.I'm going to map.it with 98 octane fuel and aquamist hfs3...

Tomas, the 3" dp is enough for even 800 hp that are absolutely dream for this teen turbo

Good to hear!
Anyway I'm fitting a cutout exhaust valve just where downpipe ends... To help with back pressure! I'm sure it must help a little

Edit .and I run a separate screamer pipe

[URQguy]

We have seen over 700whp on the gtx3582r on e85. With extended tip, it is almost a 86mm exducer turbo. It means business. This "teen" turbo has put Evos into the low 9's here in the USA.

[drego786]

lovely looking piece of kit

[|CL|NIKI]

Me advice (GT3076r) was to micky, not to Rocco.Than just told Tomas that He dont need 4" DP for 35 turbo even GTX.
And Yes - single GTX35 on a stroker engine with 1.01 a/r or even 1,15 a/r + 100% methanol can push 800 engine hp (maybe)..
It can put Evo's that are under 1000kg in 9 sec, with more than 40psi boost and E85 fuel + Dog gears and sequential shifter...right?
Here We have stroker that produce 730hp at 30psi with HTA3586 1 a/r, 100 octane normal fuel, no water/methanol - it is in middle 9 sec.

[Rocco]

Me advice (GT3076r) was to micky, not to Rocco.Than just told Tomas that He dont need 4" DP for 35 turbo even GTX.
And Yes - single GTX35 on a stroker engine with 1.01 a/r or even 1,15 a/r + 100% methanol can push 800 engine hp (maybe)..
It can put Evo's that are under 1000kg in 9 sec, with more than 40psi boost and E85 fuel + Dog gears and sequential shifter...right?
Here We have stroker that produce 730hp at 30psi with HTA3586 1 a/r, 100 octane normal fuel, no water/methanol - it is in middle 9 sec.

100 octane is normal fuel in yor country?

here unfortunately 98 is the maximun available

the same turbo will make more power in a stroker than in a 2.2? or the same but with less lag?

[|CL|NIKI]

More power and early boost. Our 100 octane maybe in fact, is not more than 98 really. Normal fuel here is 95, but for racing cars all We use 98 or 100. Thats why 100oct is normal for racing guys with over than 300+ hp. We dont use E85 because We dont got it here...

[caterpillar]

Dp

Tomas, the 3" dp is enough for even 800 hp that are absolutely dream for this teen turbo

tryed the difference between the 3" and 3,5 or 4".... and all the way back think you should give it a try...
even old diesels became unbelivabel... with 500000km at the meter...

[caterpillar]

sorry; little OT......