Gtx35 on a 2.2

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jamo
    replied
    Originally posted by Rocco
    why did you buy the huge Comp Jamo?

    The comp was smaller than a GT35R it was the same spec as a 3576r plus it was on a 2.5 litre so 500 earlier spool aka it was like having a 3076r on a 2.2

    Anymore questions?

    Leave a comment:


  • mac2226
    replied
    I would go gtx3071 and a tial housing for street use, but if your after 600+ then gt3582 tial should get that power with engine mods I would of thought

    Leave a comment:


  • Rocco
    replied
    Originally posted by Jamo
    You will hate the car if you do this, the gtx3071 is the perfect turbo for a road going I5 and especially in a light car the quattro you only need 450-500 to make the thing fast.

    GTX35 fit if you want to brag down the pub or you are going to drag race
    why did you buy the huge Comp Jamo?

    Leave a comment:


  • Jamo
    replied
    Originally posted by jsws3
    Is any one useing a gtx35 turbo on a 2.2 for road use as I'm thinking about selling my gtx3071 and going for the gtx35 .

    I will be useing water meth.
    The engine is built buy Jp over size valves ported and polished head ect ect so its up to the abuse .

    Or am I going over kill ?.
    You will hate the car if you do this, the gtx3071 is the perfect turbo for a road going I5 and especially in a light car the quattro you only need 450-500 to make the thing fast.

    GTX35 fit if you want to brag down the pub or you are going to drag race

    Leave a comment:


  • prj
    replied
    I think Marc (efiexpress) has tuned one?
    I remember talking to him on Skype about it, but can't remember what it made.

    Leave a comment:


  • jaychen
    replied
    Was wondering if you've tuned one, since you are the brains behind it all

    Leave a comment:


  • prj
    replied
    Ask the ones who make it.
    I don't see the turbine flowing more than 400hp on pump though.

    Leave a comment:


  • jaychen
    replied
    Dimitri,

    What are your thought's on the billet K26?

    Power estimate and rpm to reach full boost?

    Leave a comment:


  • GazzaG60
    replied
    think my sc6152 is about gt35 size. its non bb
    boost 4500k ish and goes on for a while thereafter.

    I like it. maybe not the fastest response but I was happy with it. maybe not if I use it again. time will tell.

    Leave a comment:


  • murat
    replied
    From what I have read in nasion, GTX35 is the worst improvement on the gt/gtx switch.

    http://forums.nasioc.com/forums/show...41&postcount=7


    Spools later than GTX30 but the power improvement is tiny


    I am running a GTX3076 .82 ar and i think its almost on the limit for street driveability.

    Leave a comment:


  • Rusty
    replied
    So a 35 would be a suitable upgrade from a 7200?

    Leave a comment:


  • Rocco
    replied
    Kkk turbos dealer are you now dmitri?

    Do you think that even with 270 bearing are better,stronger than garretts?

    Leave a comment:


  • prj
    replied
    Never tried one, but I don't see the point. For 350 hp I'd get the K24-7400 each and every time...

    Leave a comment:


  • Rusty
    replied
    What's the HX30 like? Too small?

    Leave a comment:


  • prj
    replied
    HX35 Super and HX40 Super with correctly sized hotsides.
    4000 rpm and 4600 rpm full boost, up to 500 and up to 650 hp with w/m injection.
    For less power or rally, the KKK 7400 and 7200 are very good choices.

    Leave a comment:

Working...