S2 to RS2 upgrade-Help

[prj]

Huge amount of misinformation in this thread.

You don't need to worry about any MAP sensors or resistors - this is what the person mapping your car has to worry about - not you!
I have a generic map for RS2 hardware well, and all the MAP sensor, resistor etc are included in price.

What you need:
Exh. manifold, fuel pump, injectors, turbo, exhaust (or at least a decat if you use the stock one).
Most likely your coils (if still original and never changed) will not handle the higher boost, so that likely needs fixing/upgrade as well.

As for "350 hp on stock injectors" - with 3B injectors this is possible with a 5 bar FPR, but not on ABY/AAN ones, as they flow less.

[GazzaG60]

agree with prj there.

i did 321 on the rollers on stock s2 aby injectors totally maxed out. may have made a few more hp by moving the curve and boosting less but higher rpm.

keep it simple its easy to make hp on the i5. a good tune is key as always

[piotr]

Thank you guys.PRJ i will pm you tonight for more details if that ok with you?

[prj]

Yes, that's alright, I'm sorry if I don't reply right away - I have a lot of work so do not visit the forum daily anymore, but I will reply asap.

[piotr]

Many thanks !