fly by wire trottle s6

[A1quattro]

hi i beleave the 20vt s6 {1996} do not use a throttle cable , instead its done with electric sensors , has any one transferd this set up to a s2/rs2 . our the sensors and throttle activator all light weight , im thinking it could save a bit of weight and if i go with motec it can be used

[silizium]

urs6 use throttle cable.

[Kieron20V]

AAN is still a conventional throttle cable. I think the later vr6 throttle bodies are dbw and can be fitted with an adaptor plate.

Sent from my HTC One X+ using Tapatalk

[UrS4boy]

hi i beleave the 20vt s6 {1996} do not use a throttle cable , instead its done with electric sensors

Umm....NO! And besides, drive-by-wire throttle is awful. Makes no sense to convert from cable, especially if the reason is to save weight.

AAN:

[A1quattro]

many thanks think i will take your addvice and stick with cable

[spink]

C4 tdi a6 is probably what you were thinking of Ray

[Kieron20V]

Tdis don't have a throttle body...?

Sent from my HTC One X+ using Tapatalk

[spink]

Tdis don't have a throttle body...?

Sent from my HTC One X+ using Tapatalk

Im not sure if you are asking a question or not.No, tdis dont have a throttle body

[prj]

Im not sure if you are asking a question or not.No, tdis dont have a throttle body

Most newer ones do.

[prj]

Umm....NO! And besides, drive-by-wire throttle is awful.

Disagree, you can do a lot of cool things with it, which you can't do with the regular one.
Including not needing high revs when car is started from cold and not needing an ISV.

[UrS4boy]

Disagree, you can do a lot of cool things with it, which you can't do with the regular one.Including not needing high revs when car is started from cold and not needing an ISV.

Sure. I recently bought a drive-by-wire vehicle for my wife and it just about killed us due to lack of immediate throttle response, so, yes, it is awful.

[prj]

Sure. I recently bought a drive-by-wire vehicle for my wife and it just about killed us due to lack of immediate throttle response, so, yes, it is awful.

No such problem on Audi/VW, BMW, Mercedes.
Your car is just broken.

[A1quattro]

thanks prj , the reason i asked the question is because i was speaking to keith at diaylnx and he runs it on his 1.4 turbo audi 80 race car for the last 2 years without any issues, he said it works great with motec .

[prj]

As it does on my Audi RS4.

[fundahl]

Hmm.... this would clean the engine bay up even more if it was drive by wire.... Wonder if there is a throttle body that would mount up to AAN intake manifold and work with VEMS....