Gt42

[bigcooler]

So I could run it with standard ecu (with a remap) and wont have to get vems etc? I have the 6 speed s2 gearbox also will that take the power? What sort of power will it produce?

[driftin jo]

If you have a healthy engine the minimum you will need is, con rods, exhaust manifold, big injectors, big downpipe/exhaust and obviously a remap.

[bigcooler]

Sorry I have a stock aby running rs2 hybrid rs2 ex manifold larger injectors bosch 044 fuel pump and 4 bar map sensor And chipped standard ecu

[Ruffiano]

exhaust gases. that will run the turbo.


Perhaps your question is a bit vauge... you might want to rephrase, perhaps include the type of vehicle and modifications already on the car.

As a general rule if it is going on a 2.2 inline 5 turbo you will need strong rods, stronger pistions, to start, along with larger fuel pump(s), injectors, exhaust manifold, downpipe, ect ect.

[bigcooler]

Hi guys I want to find out what would need to be done to run a GT42 with t4 flange.
Thanks ben