3B fuel line firewall routing.

[andy10v]

Does anybody have any pictures of the standard right hand drive 3B fuel line routing across the firewall?

[andy10v]

Bump

This area, are the fuel lines supposed to be between the main loom and the firewall?

I think I have seen some brought straight up, and then run along underneath the strut brace?

[newsh]

Hold up, I'll just nip out in the dark and rain to get you a few pics!

[newsh]

Basically, they go across the steering column, turn back towards the firewall and go up through a clip, then just below the big loom they come back towards the front of the car about 3" and turn right then back up again through a clip mounted to the bracket in front of the heater hoses.

[andy10v]

Brilliant, that is perfect, thank you

I dont know how I ended up with a clip in the wrong place

I had better put the loom back in first then.

Do you still need that breather? I have one you can have, just pm me your address if you want it.

[newsh]

You're welcome Andy

Your lower clip is correct but the pipes should be coming upwards through it. The upper clip has been parked on the wrong spike (mine has the spike there but nothing on it).

It's quite funny, that will make 3 of those pipes in the last few days, I've only been looking for a year or so..

I cut the middle pipe for the tank breather up into short lengths and wiggled them out, did it when I changed the rack.

[Error404]

The 3B fuel line routing looks identical to the 7A as well