Help moving altinator for bigger intercooler on ur quattro

[robbie100hp]

Hi guys what is needed to swap my altinator to the other side of my engine in my audi ur Ur quattro rr 20v so that I can fit my larger intercooler in the original position? I believe there is an s2 or rs2 engine with it running on the passenger side,

I'm guessing I need/need to do

Bracket
Belt
Extend the wiring
New altinator?

Any help would be great

Thanks Robbie

[Doc_brown]

you need a 3b setup as aby/rs2/aan belts are different

[quattro-nick]

why not running a ic at the front? you can put there a bigger one than on the origional place!
here are a few forum members with a front ic
my intercooler stands above the crankshaft pulley

[robbie100hp]

Does any body have a 3b set up?

[AndyP]

The 3B set up is the same as the RR set up I believe? They are still on the passenger side it just uses a V belt not a multi v or ribbed belt like the ABY.

[robbie100hp]

The altinator is on the drivers side on an rr , I need it to be on the passenger side.

So is it a 3b set up I need?

[AndyP]

The altinator is on the drivers side on an rr , I need it to be on the passenger side.

So is it a 3b set up I need?

OK I stand corrected, in that case you do need a 3B set up.

[AndyP]

This is the 3B alternator in an S2

[K Simmonds]

Think I've got a spare 3B mounting bracket and adjuster knocking about, I may have an alternator as well but will have to check.

[robbie100hp]

That's perfect cheers is the bracket any different do you know? And the belts? Has anybody done this mod on here?

[K Simmonds]

The bracket I've got is the same as the one in Andy's pic, you'll need a 3B belt and you'll also have to reroute some unfused live wires which must be done with care.

[V6quattro]

I moved my altinator to the right side of the engine.

[adam g]

why not running a ic at the front? you can put there a bigger one than on the origional place!
here are a few forum members with a front ic
my intercooler stands above the crankshaft pulley

To squeeze a front mount into a UR you need to put in a 6 speed box to pull the engine back a few mm and delete the aux rad so not too easy. Or fit the rally style grill that sticks out a foot. Also unless you have a reverse manifold you're left with a lengthy intake system.

Sent from my C5303 using Tapatalk

[robbie100hp]

And Iv already got the intercooler and I don't want to butcher my quattro

[AQTdriver]

I moved my altinator to the right side of the engine.

i can help out with this setup if anyone is interested...