6 speed

[butchone]

can anybody tell me if this 6 speed code is the narrow or wide 1st gear and car its from?
01E 301103
thanks in advance

[UrS4boy]

can anybody tell me if this 6 speed code is the narrow or wide 1st gear and car its from? 01E301103 thanks in advance

01E301103 is just the case part number. It was superceded in 1996 to 01E301103K and is listed as the case for the CBD, CET and CBL transmissions. Just the case number isn't enough to tell what is inside. Find some more numbers on it.

01E Manual Transmissions (all have 37/9 = 4.11 to 1 crown/pinion ratios)

CBD - Early Euro and ROW 5 spd manual quattro
CBD - NAmerican UrS4 and UrS6 (to 96) 5 spd manual quattro
CBL - Euro and ROW 6 spd manual quattro
CET - Euro and ROW 5 spd manual quattro
DPG - 97 Euro and ROW 5 spd manual quattro
DPH - 97 Euro and ROW 6 spd manual quattro
DPM - 97 NAmerican 5 spd manual quattro, e.g. 97 Canadian UrS6 (like Sean D's)

[Guslotti]

can anybody tell me if this 6 speed code is the narrow or wide 1st gear and car its from?
01E 301103
thanks in advance

[UrS4boy]

Don't know how you got that info from the case number 01E301103. The CRB PN is 01E300043SX and its case number is 01E301103K.

[butchone]

yes looks like ive took the case number down, it was between the two upper bell housing bolt holes. there is a large (10mm) code stamped on the bottom on the speedo drive side im sure it starts CBL..... will get it today

[butchone]

i have 2 gearbox's and found these codes, hope there correct identification

gearbox 1 CBL 18604X

gearbox 2 CBL 39795

these were both on the bottom of each gearbox

[UrS4boy]

i have 2 gearbox's and found these codes, hope there correct identification. gearbox 1 CBL 18604X, gearbox 2 CBL 39795
these were both on the bottom of each gearbox

CBL 18604 was originally built in March 92 so it would have had the narrow first gear when it was built. "X" implies rebuilt so your guess is as good as mine (i.e. no clue as to what is inside). You might get lucky and get the 105J main/first gear shaft (see below).

CBL 39795 was originally built in April 1993, still unlikely to have a wide first gear, probably the original narrow first geat. No "X" implies original.

PN for both of these 6 spd CBLs should be 01E300044EX. The current part listing says that the first gear shaft is the 01E311105J which is the one from the CRB RS2 transmission. That DOES NOT mean that is what is in your CBLs. It just means that Audi had decided that the 105J first gear main shaft is the best and the only one that they needed to keep in stock (stock might be gone now anyway, so moot). Pricy in any case (so to speak).

[butchone]

brilliant!! Thats a great help
thanks very much

[A1quattro]

not all 01e boxs are 3.9 final drive . the allroad 01e six speed manual is 4.375 . think code is AKE

[A1quattro]

Sorry Meant To Say 4.1 Not 3.9

[UrS4boy]

Sorry Meant To Say 4.1 Not 3.9

ALL the 01E's used in the S2s, RS2s, UrS4s and UrS6s are 37 teeth /9 teeth crown/pinions = 4.11 to 1. Same with the rear diffs.

The B5 S4 and C5 2.7 tt 6 spd transmissions are 01Es with 4.11 to 1 ratio and will bolt to an AAN, and, perhaps, an ABY or ADU (but the ADU's CRB should be better than the 2.7tt 6 spds)

Agree that there are some 01Es that are NOT 4.11.

[caterpillar]

ONLY the ratio/ gearcode will confirm that.... some unit are delivered for other countries, and some have the automatic transmition changed....

[diogocartier]

Take a look on the links below.

http://www.elektro.com/~audi/01E/

http://www.elektro.com/~audi/01E/ind1.html

http://www.elektro.com/~audi/01E/parts/

[vag_nutter]

there is 3.89 01e's. I have one, its code is env. Has an oil cooler as well

[UrS4boy]

there is 3.89 01e's. I have one, its code is env. Has an oil cooler as well

Sure, but that is a B5 or B6 (2001 or newer) A4 2.5L TDI transmission.

http://www.elektro.com/~audi/01E/