Can this be easily done? Have the intercooler and crossmember from an ABY to fit a 3B. It has a Roose Boost kit for a 3B. Not sure if this will fit? Can anyone advise?
-
-
Crossmember and IC will bolt on no problem, you might have to shorten one of the hoses a bit as I think the IC pipe comes up a bit higher. (but that might be the RS2 IC as I have been through all the variations on my 3B over the years)
In any case it should be easy.
-
I think a 3b cross member has a bend facing up for the pipe going to the pipe above the exhaust manifold and a aby has a straight pipe coming out . I think you might need a aby style pipe to connect up the cross member to the pipe going over the exhaust manifold . Other than that bolt it all on and away you gonever set your expectations to high that way you are never disapointedComment
-
Oh ya another thing the pipe coming from the turbo to intercooler might need shortening a bit as I think a 3b intercooler is a bit shorter than a aby not 100 % sure about that one though .never set your expectations to high that way you are never disapointedComment
-
That's right you need the ABY cross member too metal intake pipe hose and it need's about 1/2" trimming from both ends. The hose from the turbo too intercooler also needs to be shortened but will fit.1990 B3 2.0 80 quattro.
1992 C4 2.8 Avant quattro
1994 MTM RS2.
1998 B5 TDI quattro Sport.
2000 B5 TQS.Comment
-
Guys thanks very much for the help. I'll look into this when the car comes back from MOT. CheersComment
Comment